Wednesday, June 15, 2016

How to create bootable USB drive




hey guys today i gonna tell you how to create bootable USB flash drive.that helps us to install repair your current OS(Windows linux /unix etc) with out using DVD ROM. in notebooks this is the most suitable way to install OS. And i think this will be help to all friend who are using faulty CD/DVD ROM drive. and Using this method you can also run live CD/DVD image files using your USB Flash(pen) drive .
                           There is two methods to create usb bootable drive using application or using command prompt. if you are not enough familiar with command prompt i recommend you  to use application method



1. Using Win to bootc software



first you have to download the software (you can download it from bellow link)
and you must download os that you want in iso or nrg format
Download here
please wait 5 sec and click skip ad

then install it
open win to bootic software





then insert the flash drive
then click on source icon and select the
then select your USB drive and please put a tick on Quick format check box
then click on DO IT
now you can appear the following screen


please don't unplug the usb drive until the task being compleated

after this step your Bootable USB is ready to use.




2. Using Command prompt




this is the way to create a bootable USB flash drive
Insert a USB flash drive into a running computer.
Open a Command Prompt window as an administrator.
Type diskpart.
In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt,
type list disk, and then click ENTER.
The list disk command displays all the disks on the computer.
Note the drive number or drive letter of the USB flash drive.
At the command prompt, type select disk <X>, where X is the drive number or drive letter of the USB flash drive, and then click ENTER.
Type clean, and the click ENTER. This command deletes all data from the USB flash drive.
To create a new primary partition on the USB flash drive, type create part pri, and then click ENTER.
To select the partition that you just created, type select part 1, and then click ENTER.
To format the partition, type format fs=ntfs quick, and then click ENTER.
System_CAPS_importantImportant
If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS.
To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
Type active, and then click ENTER.
Type exit, and then click ENTER.
When you finish preparing your custom image, save it to the root of the USB flash drive.





i'll hope  that will be a help for you all.

No comments:

Post a Comment